-
Read MoreSulfur Recovery Plant for Major Oil Company, Santa Barbara, CA
On-site coating inspection services for the project. The project specification consisted of three coat system, involving inorganic zinc primer, followed by an aliphatic polyurethane midcoat, with a final coat of polyamide epoxy for all skids and uninsulated piping. There is an estimated 5 miles of piping on all skids with sizes ranging from 1/2″ to 10″ including electric conduit and insulated...
Company and Industry News
Judge reaffirms decision to halt Keystone XL, others under nationwide permit program
A federal judge in Montana has reaffirmed his decision to block construction...
Full StoryU.S. drillers cut oil & gas rigs to historic low -Baker Hughes
The number of operating oil and natural gas rigs fell to an all-time low –...
Full StoryWorkers repair corrosion problem at Beaver Valley nuclear reactor
Repairs have corrected a small corrosion problem in the Unit 2 nuclear reactor...
Full StoryUnderstanding galvanic corrosion
Galvanic corrosion is often misunderstood. This four part peer reviewed...
Full StoryStress corrosion cracking led to canadian pipeline rupture, fire
Investigators determined that the pipeline ruptured due to stress corrosion...
Full StoryCorrosion basics: Corrosion and the environment
Corrosion Basics don’t get any more basic than the definition of corrosion as...
Full StoryBasic Concepts of Induced AC Voltages on Pipelines
The subject of an article published in 1995 is more relevant today than ever...
Full Story
